Phase Field Modelling Allotropic Transformation of Solid Solution

Based on multiphase field conception and integrated with the idea of vectorvalued phase field, a phase field model for typical allotropic transformation of solid solution is proposed. The model takes the non-uniform distribution of grain boundaries of parent phase and crystal orientation into account in proper way, as being illustrated by the simulation of austenite to ferrite transformation in low carbon steel. It is found that the misorientation dependent grain boundary mobility shows strong influence on the formation of ferrite morphology comparing with the weak effect exerted by misorientation dependent grain boundary energy. The evolution of various types of grain boundaries are quantitatively characterized in terms of its respective grain boundary energy dissipation. The simulated ferrite fraction agrees well with the expectation from phase diagram, which verifies this model.     

Transformation of Nanomaterials and Its Implications in Gut Nanotoxicology

Ingestion of engineered nanomaterials (ENMs) is inevitable due to their widespread utilization in the agrifood industry. Safety evaluation has become pivotal to identify the consequences on human health of exposure to these ingested ENMs. Much of the current understanding of nanotoxicology in the gastrointestinal tract (GIT) is derived from studies utilizing pristine ENMs. In reality, agrifood ENMs interact with their microenvironment, and undergo multiple physicochemical transformations, such as aggregation/agglomeration, dissolution, speciation change, and surface characteristics alteration, across their life cycle from synthesis to consumption. This work sieves out the implications of ENM transformations on their behavior, stability, and reactivity in food and product matrices and through the GIT, in relation to measured toxicological profiles. In particular, a strong emphasis is given to understand the mechanisms through which these transformations can affect ENM induced gut nanotoxicity.     

铁氧化物在流化床温度和CO气氛下的形态迁移及其对NO催化还原

利用小型固定床实验台实验研究了铁氧化物在典型流化床温度和CO还原性气氛下的形态迁移及其生成物对NO的催化还原作用，采用分级还原结合X射线衍射（XRD）表征分析，确定铁氧化物与CO和NO反应后生成物的价态及各种铁氧化物对NO的还原机制。结果表明，Fe₂O₃在实验条件下可依次被CO还原为Fe₃O₄、FeO和单质铁，反应过程中随着还原度的增加，还原速率逐级下降，从Fe₂O₃还原到Fe₃O₄的速率最高，FeO还原到Fe速率最低，在实验温度范围内，床温升高有利于提高Fe₂O₃到Fe₃O₄的还原速率和还原度。不同形态的铁氧化物对NO的催化还原特性不同，Fe₂O₃及其部分还原后生成的Fe₃O₄都不能直接与NO反应，Fe₂O₃对CO催化还原NO的效果很弱，而Fe₃O₄对CO还原NO的反应却有很强的催化作用，而进一步还原生成FeO与单质铁还可直接与NO反应。     

基于儒可夫斯基变换的涡轮钻具叶片设计及性能分析

为提高涡轮钻具叶片使用性能和创新叶片设计理论,提出了基于儒可夫斯基保角变换法与经典水力翼型相结合的涡轮钻具叶片设计新方法,以?127涡轮钻具叶片为研究对象,运用搭建的涡轮钻具叶型参数化设计平台和自主设计的涡轮钻具性能测试台架,完成了5种翼型的造型设计,研究了5种叶片流场性能,开展了设计叶片的性能测试实验,对比分析了设计叶片与塔里木油田某型在役?127涡轮叶片的实际效能。实验及仿真结果表明,基于新方法设计的NACA-0012翼型加厚叶片在600 r/min转速及15 L/s流量的设计工况下,其单级扭矩达5.83 N·m,较相同条件下某在役?127涡轮的单级扭矩提高约6.4%,级效率提高约1.16%,整体性能有了实质提升。     

热处理工艺对30MnCrNiMo高强钢组织与性能的影响

借助全自动淬火膨胀仪测定钢的Ac₁、Ac₃相变点,通过对试验钢进行淬火+亚温淬火+回火热处理和淬火+回火热处理,研究了两种热处理工艺下30MnCrNiMo高强钢的组织与性能。结果表明:30MnCrNiMo高强钢的Ac₁、Ac₃相变点分别为653、807 ℃。采用淬火+亚温淬火+回火的热处理工艺所获得的马氏体和铁素体复相组织比直接淬火+回火得到的全马氏体组织更为细小、均匀,试验钢的屈服强度为1499 MPa,伸长率为14.0%,室温、-40 ℃冲击吸收能量分别为35.5和29.5 J,钢的塑性和冲击性能显著提升,有效改善了30MnCrNiMo高强钢的强韧性能。     

2.25Cr-1Mo与2.25Cr-1Mo-0.25V钢冷却转变对比分析

采用相变仪、光学显微镜及扫描电镜研究了2.25Cr-1Mo和2.25Cr-1Mo-0.25V钢冷却转变过程,并分析了钒对其冷却转变的影响。结果表明,与2.25Cr-1Mo钢的CCT曲线相比,2.25Cr-1Mo-0.25V钢铁素体转变区及贝氏体转变区均向右移,并且在现有试验条件下已无法观察到珠光体转变区;钒添加到2.25Cr-1Mo钢中,能够提高钢的淬透性,2.25Cr-1Mo-0.25V钢在48 000 ℃/h冷速下能生成部分马氏体;钒能够细化钢板显微组织,与2.25Cr-1Mo钢相比,2.25Cr-1Mo-0.25V钢在800 ℃/h冷速下组织更为细小。     

中控机房的改造思路

由于我台倒班方式，造成了技术管理分散，不利于人才的培养和电台健康的发展。为进一步提高电台安全播出管理水平，推进电台的自动化建设，充分利用现代化手段，对中控机房进行了改造。新模式的成功实施，能极大地提高我台安全传输发射水平。     

金川集团化工厂铜冶炼烟气制酸中温位余热回收

阐述金川集团化工厂530 kt/a铜冶炼烟气制酸系统扩能改造和余热回收前存在的问题,在遵循尽可能保留现有工艺管线和保证余热高效回收的原则上对转化工艺进行改造完善,将转化流程由原设计的“3+1/Ⅳ.Ⅰ-Ⅲ.Ⅱ”四段转化改为“3+2/Ⅴ.Ⅰ-Ⅲ.Ⅱ.Ⅳ”五段转化工艺流程,研发适合冶炼烟气制酸系统的分离型热管余热回收工艺技术.生产实践证明,该工艺在确保转化热平衡的基础上提升转化率,优化系统工艺技术指标,实现回收转化中温位富余热量生产饱和蒸汽,保证制酸系统与铜冶炼系统的匹配化生产,节能减排效益可观.     

如何实施社会转型期的民办高校品牌战略

在社会转型期，面对日益激烈的市场竞争环境，如何制定民办高效发战战略，引导民办高效的可持续发展，是关系到民办高校兴衰的关键。本文主要从民办高校品牌战略入手，对社会转型及高等教育转型进行论述，并对如何加强民办高校品牌建设进行探讨。